Ethanol Fireplaces

Ethanol fireplaces work by burning bioethanol fuel, a clean-burning renewable alcohol made from fermenting plant sugars, in a self-contained, stainless-steel burner. When you ignite the fuel with a lighting rod, it combusts at the fuel surface, producing heat, water vapour, and minimal CO₂; there's no smoke, soot, or ash.

The real innovation is in flame stabilisation. EcoSmart Fire burners use physical regulators, including steel wool in compact models like the AB3 and baffle inserts in larger burners, to control fuel evaporation and distribute the flame evenly. This not only stabilises the flame but optimises fuel efficiency, extending burn times to 7–13 hours depending on burner size and capacity.

Shutting down is equally straightforward. A slider or hinge mechanism closes off oxygen, extinguishing the flame in seconds without any residual smoke or smell. Because combustion requires no flue, chimney, or gas line, ethanol fireplaces are truly ventless; the burner stays sealed until you're ready to refuel.

This combination of clean combustion chemistry and elegant mechanical control is what makes ethanol fireplaces such a flexible heating and ambience solution.

Yes, ethanol fireplaces are safe for indoor use when installed to manufacturer guidelines and used in properly ventilated spaces. They're engineered with multiple safety layers: spill-proof fuel systems, flame arresters in fuel bottles, and automatic shut-off lids that extinguish flames when closed. EcoSmart Fire's products have passed over 100 laboratory tests simulating real-world scenarios and meet UL 1370 (North America), EN16647 (Europe), and ISO 17873 international safety standards.

Complete combustion produces only water vapour and a small amount of carbon dioxide (CO₂) — equivalent to approximately two burning candles. There's no smoke, soot, or ash to compromise indoor air quality. Unlike wood or gas fireplaces, ethanol burners require no chimney, flue, or gas line, which eliminates an entire category of installation risks.

Ventilation is straightforward: adequate air exchange must occur during operation, but natural room air infiltration through windows, doors, and standard building ventilation is sufficient for most indoor environments. EcoSmart Fire provides specific room-volume guidance (typically 40–116 m³) to help you verify your space meets requirements. The absence of combustion byproducts like carbon monoxide means ventilation functions purely to maintain oxygen supply, not to exhaust dangerous gases. This is fundamentally different from traditional fireplaces.

Safety is built into both the product and how you operate it. Follow fuel handling instructions, use only approved e-NRG bioethanol fuel, maintain adequate room volume, and verify your space meets ventilation guidelines before installation. When these conditions are met, indoor ethanol fireplaces deliver clean flame with the peace of mind of engineered reliability.

Bioethanol fireplaces are purpose-engineered as decorative appliances, delivering real, adjustable flame ambience without a chimney, gas line, or installation. They are not designed for cooking.

Their burners produce variable, dancing flames optimised for atmosphere, not the consistent, controlled heat that food preparation requires. The burner containers are designed to display flame elegantly, not for direct food contact. There are no temperature controls, cooking grates, or heat-resistant surfaces suited to cookware placement.

EcoSmart Fire bioethanol fireplaces are UL-listed as ventless decorative appliances, which is what they do best: transforming indoor and outdoor gathering spaces with real, clean flame that is immediate, zero-installation, and endlessly adaptable to any setting.

Yes. EcoSmart Fire offers dedicated outdoor fireplace categories: fire tables, fire pits, and insert-style units, all rated for outdoor use. These are engineered with weather-resistant materials: mild steel with zinc-sealed high-temperature powder coating, 304-grade stainless steel burners, and toughened glass screens. Fire tables feature handcrafted Fluid Concrete surrounds or Grade A teak; fire pits use weather-resistant Fluid Concrete construction.

To install safely outdoors, follow these clearance guidelines:

• 2,000 mm [78.7 in] clearance overhead
• 600 mm [23.6 in] clearance from fixed objects (walls, fences, railings)
• Level, non-combustible surface (stone, concrete, pavers; not grass or artificial turf)
• 12.5 mm [0.5 in] air gap beneath the unit, typically via articulating feet

Because bioethanol produces no sparks, embers, or ash, the units are safe for timber decks when proper clearances are maintained. They're suitable for year-round entertaining. Simply keep burners clean every 50 litres of fuel, and use an All-Season Cover (600D Oxford fabric with UV coating) for storage.

Yes, ethanol fireplaces produce genuine, clean-burning heat that meaningfully warms spaces. EcoSmart Fire bioethanol fireplaces deliver quantified heat output across burner sizes: compact burners like the AB3 produce 2 kilowatts (5,800 BTU/h) and warm spaces around 20 m² [215 ft²], whilst larger models like the XL900 output 4 kilowatts (15,000 BTU/h) and effectively heat areas up to 60 m² [646 ft²].

The real advantage lies in the ventless design: heat efficiency exceeds 90 per cent because all thermal energy stays in your room, unlike traditional vented fireplaces that lose approximately 30 per cent through the chimney.

To choose the right burner, match it to your room size. Smaller burners suit compact rooms around 20 m², mid-range burners heat spaces of 40–60 m² comfortably, and larger configurations work for open-plan interiors. Burner selection also affects burn duration, with most models running 7–14 hours depending on flame height; consider both your heating needs and intended use.

Yes, you can turn your EcoSmart Fire burner off at any given time, even if there is ethanol still left in the burner. It is recommended however, that you leave it to burn until it completely runs out. The shut-off mechanism is there for security and safety for those times when you need to leave the house, as it is not safe to leave a fire unattended.

Please wait 60 minutes before relighting the ethanol after extinguishing it to let the ethanol cool. Built-up vapours may cause a strong, initial ignition if the ethanol has not cooled long enough.

For all other brands, refer to the manufacturer's instructions.

Ethanol fireplaces work best as supplemental heat sources paired with existing climate control, rather than as primary heating for your home. EcoSmart Fire bioethanol burners deliver genuine warmth. The XL900, for example, produces 4 kW (15,000 BTU/h) of thermal output, and because the fireplace is ventless with closed combustion, every BTU stays in the room rather than escaping through a flue.

This makes them ideal for extending your entertaining season, reducing heating demand in a gathering space, or replacing a traditional fireplace entirely. You'll get real warmth and flame without installing gas lines, venting, or structural modifications. Pair it with your existing heating system for full-home comfort, and use the fireplace to create warm focal points in spaces you want to enjoy more, such as a sitting room or outdoor entertaining area.

Yes, room-vented bioethanol fireplaces do produce water vapour through combustion, and condensation can occur in spaces that are undersized or poorly ventilated. EcoSmart Fire's design addresses this directly: minimum room volume requirements are scaled to each burner's heat output, ensuring moisture disperses safely across the air volume rather than accumulating on surfaces.

Smaller burners (around 4 kW) need at least 110 m³ [3,885 ft³], whilst larger burners (13 kW) require 330 m³ [11,654 ft³] or more. This scaling ensures combustion byproducts, including water vapour and carbon dioxide, are diluted proportionally to the burner's output.

In properly sized rooms with normal air circulation (doors, windows, existing HVAC), condensation is not an issue. Problems arise only when a fireplace is oversized for its space or installed in a room with poor air exchange; matching the burner size to the room prevents either outcome.

Separately, ambient moisture from external sources, such as humid storage environments or spilled water, can contaminate the burner reservoir and prevent ignition. This is a maintenance concern distinct from normal combustion, resolved by draining, drying, and refuelling with fresh bioethanol.

As a room-vented design, ventless bioethanol fireplaces are regulated under product safety standards (UL 1370, EN 16647, ACCC) rather than traditional building codes that govern gas or wood-burning installations. EcoSmart Fire ventless fireplaces meet these safety standards and require no chimney, gas lines, or electrical hookups, which eliminates many code compliance complexities. Because bioethanol combustion produces no smoke or harmful emissions, ventless fireplaces bypass venting and structural requirements that apply to conventional fireplaces.

Regulations do vary by jurisdiction, so we recommend consulting your local building authority during the design phase to confirm any region-specific requirements for your project. Key installation specifications, such as 600 mm [23.6 in] clearance from combustibles and adequate room volume (typically 40–110 m³ for most residential models), are designed to ensure safe operation and are integrated into all EcoSmart Fire product documentation.

The ventless design simplifies the approval process because it eliminates the need for multiple trades (gas fitting, electrical, ventilation) and their associated code pathways. This makes ventless fireplaces particularly practical for retrofits, multi-residential applications, and properties where traditional fireplaces aren't viable.

Ethanol fireplaces typically don't require building permits in most jurisdictions because the ventless design avoids the restrictions that apply to traditional fireplaces. Since there's no chimney, gas line, or flue to regulate, ethanol fireplaces fall outside the strict building codes created for wood and gas systems. EcoSmart Fire products carry UL 1370 and EN 16647 certification, meeting the safety standards most building authorities reference, which often results in automatic exemption from permit requirements.

Where to verify for your location:

• Contact your local building authority directly with your address and installation plan. Most can confirm permit status in one conversation.
• If you're in an apartment, managed community, or strata scheme, notify your body corporate or residents' committee. Whilst permits may not be required, the organisation may want advance notice of the addition.
• Check with your home insurer. Most policies cover ethanol fireplaces without additional riders, but confirming coverage beforehand simplifies the process should a claim arise.

Jurisdictional variation is minimal. With over 150,000 EcoSmart Fire installations across North America, Europe, the UK, and Australia since 2004, the regulatory picture is consistent: ethanol fireplaces gain approval where they're assessed against safety standards rather than traditional fireplace codes. If your jurisdiction does impose conditions, they're typically straightforward ventilation or room-volume requirements, not permit blockers.